Sikkerhedsstandarder for TEGERA-beskyttelseshandsker
Det er vigtigt at forstå de internationale sikkerhedsstandarder for at kunne vælge certificerede beskyttelseshandsker, der passer til risiciene på din arbejdsplads. Denne side beskriver de vigtigste standarder for handsker – såsom EN 388, EN ISO 374, EN 407, ASTM 2878 og IEC 61340 – og fremhæver, hvordan alle TEGERA-beskyttelseshandsker lever op til de relevante normer for at understøtte beskyttelsen af medarbejdere i forskellige brancher.
Hvorfor EN og andre sikkerhedsstandarder er vigtige for din beskyttelse
Sikkerhedsstandarder – uanset om det er EN, ISO, ASTM eller IEC – er det ikke bare tekniske betegnelser. De er din sikkerhed for, at de handsker, du bruger, er blevet testet i praksis til virkelige arbejdsforhold. Uanset om du håndterer skarpe værktøjer, arbejder med kemikalier, udsættes for varme eller kulde eller blot har brug for et pålideligt greb og komfort, er disse standarder med til at sikre, at dine handsker fungerer som lovet.
Når du forstår, hvad hver standard omfatter, bliver det lettere at vælge handsker, der beskytter dine hænder, mindsker træthed og understøtter et sundt arbejdsliv på lang sigt. Alle TEGERA-beskyttelseshandsker er certificeret til at leve op til de relevante standarder, så du kan arbejde trygt – velvidende at din sikkerhed bygger på dokumenteret ydeevne.
Risk Categories for Safety Gloves – Understanding Protection Levels
CE marking confirms that a safety glove model meets the essential health and safety requirements defined by European legislation. Under the EU PPE Regulation (EU) 2016/425, all CE-marked protective gloves are classified into one of three categories based on the level of risk they are designed to protect against—ensuring consistent safety performance across industries.
EN ISO 21420 Protective Gloves Standard — General Requirements and Test Methods
EN ISO 21420:2020 defines the general requirements for all protective gloves, including design, safety, comfort, and labeling. This page explains what the standard covers, why it matters, and how it supports glove selection and compliance.
EN 388 Standard – Mechanical Protection in Safety Gloves
EN 388 is the European standard for evaluating safety gloves against mechanical risks such as abrasion, cuts, tears, punctures, and impact. It provides a clear performance rating system to help match glove protection levels with specific workplace hazards.
EN 407 Standard – Thermal Risks (Heat and/or Fire) in Safety Gloves
EN 407 is the European standard that defines how protective safety gloves are tested and rated for resistance to heat and fire. It ensures that gloves used in high-temperature environments meet strict safety and performance requirements.
EN 511 Standard – Cold Protection in Safety Gloves
EN 511 is the European standard that specifies requirements and testing methods for safety and work gloves designed to protect against cold risks. It ensures that gloves provide reliable insulation and water resistance in low-temperature environments, safeguarding hands from frostbite and performance loss.
EN ISO 374 Standard – Protective Gloves Against Chemicals and Micro-organisms
EN ISO 374 is the European standard that defines how protective gloves are tested and classified for resistance against hazardous chemicals and micro-organisms. It ensures gloves meet strict safety requirements to protect users in environments where chemical and biological risks are present.
EN 12477 Standard – Welding Protection in Safety Gloves
EN 12477 is the European standard that defines safety requirements for gloves used in welding and related processes. It ensures that gloves provide reliable protection against heat, sparks, and mechanical hazards while maintaining dexterity for handling tools and materials.
EN ISO 10819 Standard – Vibration-Reducing Safety Gloves
EN ISO 10819 is an international standard that defines how to test and evaluate gloves designed to reduce hand-arm vibration. It ensures that gloves provide measurable protection against vibrations transmitted from tools to the hands.
ASTM F2878 Standard – Needle Puncture Resistance in Protective Gloves
ASTM F2878 is an internationally recognized standard for testing protective materials against puncture from hypodermic needles. It ensures that gloves and garments provide adequate protection in environments where needlestick injuries are a risk.
IEC 61340-5-1 Standard – ESD Protection in Safety Gloves
ESD (Electrostatic Discharge) safety gloves are designed to prevent static electricity from damaging sensitive components or creating hazards. They meet international standards to ensure proper resistance and safe handling in controlled environments.
EN 16350:2014 Standard – Electrostatic Protective Gloves (ATEX)
EN 16350:2014 is the European standard that defines the electrostatic requirements for protective gloves used in environments where flammable or explosive atmospheres may be present, commonly referred to as ATEX zones.
EN ISO 11393-4 Standard – Protective Gloves for Chainsaw Use
EN ISO 11393-4 is an international safety standard that defines the performance and testing requirements for gloves designed to protect against cuts from hand-held chainsaws. It ensures that gloves meet rigorous criteria for durability, cut resistance, and design to reduce injury risks in high-hazard environments.
Food Contact Requirements – Risks in Safety and Work Gloves
Safety gloves used in food handling must meet strict regulations to ensure they do not compromise food safety. According to Regulation (EU) No. 1935/2004, materials intended to come into contact with food must be safe, stable, and follow manufacturing practices.