Normes de sécurité pour les gants de protection TEGERA
Il est essentiel de comprendre les normes de sécurité internationales pour choisir des gants de protection certifiés qui correspondent aux risques encourus sur votre lieu de travail. Cette page présente les principales normes relatives aux gants, notamment EN 388, EN ISO 374, EN 407, ASTM 2878 et IEC 61340, et montre comment tous les gants de protection TEGERA sont conformes aux normes en vigueur afin d’assurer la protection des travailleurs dans divers secteurs d’activité.
Pourquoi les normes EN et autres normes de sécurité sont-elles importantes pour votre protection ?
Les normes de sécurité, EN, ISO, ASTM ou IEC, ne sont pas de simples labels techniques. Elles vous garantissent que les gants que vous portez ont été testés contre les risques du monde réel. Que vous manipuliez des outils tranchants, que vous travailliez avec des produits chimiques, que vous soyez exposé à la chaleur ou au froid, ou que vous ayez simplement besoin d’une préhension et d’un confort fiables, ces normes vous offrent l’assurance que vos gants sont à la hauteur de vos attentes.
Comprendre ce que chaque norme couvre vous permet de choisir des gants qui protègent vos mains, réduisent la fatigue et favorisent la santé à long terme sur le lieu de travail. Chaque modèle de gant de protection TEGERA est certifié conforme aux normes en vigueur, ce qui vous permet de travailler en toute confiance, sachant que votre protection repose sur des performances éprouvées.
Risk Categories for Safety Gloves – Understanding Protection Levels
CE marking confirms that a safety glove model meets the essential health and safety requirements defined by European legislation. Under the EU PPE Regulation (EU) 2016/425, all CE-marked protective gloves are classified into one of three categories based on the level of risk they are designed to protect against—ensuring consistent safety performance across industries.
EN ISO 21420 Protective Gloves Standard — General Requirements and Test Methods
EN ISO 21420:2020 defines the general requirements for all protective gloves, including design, safety, comfort, and labeling. This page explains what the standard covers, why it matters, and how it supports glove selection and compliance.
EN 388 Standard – Mechanical Protection in Safety Gloves
EN 388 is the European standard for evaluating safety gloves against mechanical risks such as abrasion, cuts, tears, punctures, and impact. It provides a clear performance rating system to help match glove protection levels with specific workplace hazards.
EN 407 Standard – Thermal Risks (Heat and/or Fire) in Safety Gloves
EN 407 is the European standard that defines how protective safety gloves are tested and rated for resistance to heat and fire. It ensures that gloves used in high-temperature environments meet strict safety and performance requirements.
EN 511 Standard – Cold Protection in Safety Gloves
EN 511 is the European standard that specifies requirements and testing methods for safety and work gloves designed to protect against cold risks. It ensures that gloves provide reliable insulation and water resistance in low-temperature environments, safeguarding hands from frostbite and performance loss.
EN ISO 374 Standard – Protective Gloves Against Chemicals and Micro-organisms
EN ISO 374 is the European standard that defines how protective gloves are tested and classified for resistance against hazardous chemicals and micro-organisms. It ensures gloves meet strict safety requirements to protect users in environments where chemical and biological risks are present.
EN 12477 Standard – Welding Protection in Safety Gloves
EN 12477 is the European standard that defines safety requirements for gloves used in welding and related processes. It ensures that gloves provide reliable protection against heat, sparks, and mechanical hazards while maintaining dexterity for handling tools and materials.
EN ISO 10819 Standard – Vibration-Reducing Safety Gloves
EN ISO 10819 is an international standard that defines how to test and evaluate gloves designed to reduce hand-arm vibration. It ensures that gloves provide measurable protection against vibrations transmitted from tools to the hands.
ASTM F2878 Standard – Needle Puncture Resistance in Protective Gloves
ASTM F2878 is an internationally recognized standard for testing protective materials against puncture from hypodermic needles. It ensures that gloves and garments provide adequate protection in environments where needlestick injuries are a risk.
IEC 61340-5-1 Standard – ESD Protection in Safety Gloves
ESD (Electrostatic Discharge) safety gloves are designed to prevent static electricity from damaging sensitive components or creating hazards. They meet international standards to ensure proper resistance and safe handling in controlled environments.
EN 16350:2014 Standard – Electrostatic Protective Gloves (ATEX)
EN 16350:2014 is the European standard that defines the electrostatic requirements for protective gloves used in environments where flammable or explosive atmospheres may be present, commonly referred to as ATEX zones.
EN ISO 11393-4 Standard – Protective Gloves for Chainsaw Use
EN ISO 11393-4 is an international safety standard that defines the performance and testing requirements for gloves designed to protect against cuts from hand-held chainsaws. It ensures that gloves meet rigorous criteria for durability, cut resistance, and design to reduce injury risks in high-hazard environments.
Food Contact Requirements – Risks in Safety and Work Gloves
Safety gloves used in food handling must meet strict regulations to ensure they do not compromise food safety. According to Regulation (EU) No. 1935/2004, materials intended to come into contact with food must be safe, stable, and follow manufacturing practices.